|
|
Cutting Edge Cutters And Carbide Insert Compositions From Iscar To Better Improve The Machining Method
Iscar is releasing Penta 34 carbide inserts utilizing a brand new PB chipformer. The PB chipformer features a single cavity having a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer with a varying frontal edge.
The brand new chipformer was fashioned for machining soft materials. It is an excellent solution for parting bearing steel and other highly ductile materials. It can be used at low feed: 0.03 to 0.10 mm/rev.
The combination of the revolutionary chipformer and IC908 grade provides remarkable chip breaking and tool life results. The Penta 34-PB is available in a 1.5 to 3.0 mm width range, made from the versatile IC908 PVD coated grade. The unique family extends the application range of Iscar's utmost cost effective grooving and parting PENTA 34 carbide inserts. The Penta 34-PB, when stacked up against to a competitor's tool, is a leading solution for machining several soft and ductile material.
Iscar's Upgrades for Parting
Iscar has developed a brand new family of reinforced Tang-Grip blades for the popular TRAUB (TNL and TNK models) and INDEX (MS18C model) turn/mill machines. These blades, due to their reinforced configuration, can be used in long overhang. Only the part of the blade imperative for penetration (cutting depth) has a reduced width. The rest is thick, which provides enhanced rigidity and stiffness. These blades are an excellent solution for parting and grooving in between the main and sub-spindle of turn/mill machines. The single-ended insert has a exceptionally rigid clamping and therefore provides a substantially substantial advantage over any other system.
Further additions to Iscar's Grip family are Do-Grip carbide inserts formed from the new Sumo Tec carbide grades: IC807 IC808 and IC830. The unique Sumo Tec grades greatly lengthen insert life, due to the most advanced coating technology followed by a particular surface treatment. This also provides reformed tool life due to lesser surface stress and an evenly coated top surface. The flat surface contributes to smooth uninterrupted chip flow, less produced heat and less friction. The new process enhances toughness and chipping resistance and thus diminishes friction and built-up edge. This in turn increases and prolongs tool life at expanded machining conditions for all types of work piece materials. The new PVD process is made of Iscar's AL-TEC coating technology, utilizing the unique surface treatment.
Iscar's Chip Splitting Inserts
Iscar's new HM90 APCR 220605-CS grooved carbide inserts put an end to chip obstruction problems in rough milling of aluminum, where chips can pile up. They are a part of Iscar's growing Helialu HM90 line of inserts styled precisely for aluminum milling. With 2 grooves pressed into each polished cutting face, the inserts split aluminum chips into a amendable size for easy, dependable evacuation despite the application's characteristic elevated chip volume. The 22 mm inserts, each with two edges, are designed to magnify metal removal over the full range of aluminum roughing conditions, from high power/low speed to high power/high speed. They work particularly well with Iscar's brand new HM90 EAL/FAL...22 aluminum rough milling cutters. Besides dependably clearing chips, the inserts conserve power and reduce chatter in long-overhang setups. The inserts feature a cavity on the bottom to make sure correct mounting in cutter chip pockets outfitted with standard spring pins. For optimum chip control, Iscar proposes using the HM90 APCR chip-splitting insert only in cutters with an even number of flutes.
Iscar Announces A Brand New Family Of Slitting Cutters Applying Tang-Grip Technology And The Strength Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.
Iscar Recently Made Public Numerous Brand New Lines To Extend Their Family Of Milling Cutters
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.
Iscar Adds Their Latest Creations To A Extensive Line Of Successful Hole Making Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.
The Latest In Carbide Endmill Architectures In A Long And Prospering Line From Iscar
Manufacturers and die & mold shops can eliminate chatter problems in many milling operations with Iscar's new Chatterfree endmills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the main source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.
Push Pull Testing For Railway Industry With Calibrated Gauges. Stress Load Testing Procedures For On Site Proof To Testing Requirements.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.
Completely New End Mills Coming From Iscar Will Expand Productivity While Lowering Costs
Manufacturers and die & mold shops can banish chatter problems in numerous milling operations with Iscar's new Chatterfree end mills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the primary source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.
Innovative Car Manufacturing Jobs To Conserve The Economic System
The global recession the economy is experiencing in the past few years have pushed major companies to close down and stop their operations.
Fresh New Rover Manufacturing Jobs
Britain's economy is trying to recover from the impact caused by the global economic recession through new Land Rover manufacturing jobs.
|
More Articles
Blogroll
|
