|
|
Iscar Adds Their Latest Creations To A Extensive Line Of Successful Hole Making Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These latest products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their knowledge Iscar has come up with new and innovative ways to boost productivity for the end user. Here is a little bit about these new products, and how they will benefit the end user of these drills.
SUMOCHAM Drills
ISCAR's new SUMOCHAM drill family is an advanced progression of the very effective CHAMDRILL and CHAMDRILLJET drill families. The drill features twisted coolant nozzles with indexable drilling heads which are available in different head configurations for assorted material groups. SUMOCHAM drills can be used on milling centers or lathes.
SUMOCHAM features four different standard drill head geometries, designed for optimum performance and high reliability. The drill head is manufactured with a sharp cutting edge and polished flutes. SUMOCHAM drilling heads are available in the diameter range of 8 to 25.9 mm. The drill head has ground flutes for smooth, continuous chip flow and a ground gash for enhanced penetration.
The drill shank design is according to DIN 9766 standard, with obtainable drilling depth to diameter ratios of 1.5XD, 3xD, 5XD and 8xD. All drill bodies feature coolant through holes. The accurate cylinder added to the clamping portion improves durability and reduces internal stresses. The rotation stopper planes are precision ground, which increase the control on the drilling head position and support, increasing tool performance and life. ISCAR's innovative SUMOCHAM drill line will offer longer tool life and higher productivity.
DR-DH Deep Drills
DR-DH drills can achieve drilling depth-to-diameter ratio of 7XD and up. Designed to be used on standard horizontal milling centers, turning, and multi-task machines. Use of supplemental machine and setup can be avoided. They will be available as semi-standard item in a diameter range of 25.4 to 69.5 mm (1.00 - 2.73").
Two versions will be available:
A Single Flute DR-DH-31.65-0350NC-2FS is a very rigid tool that has a patented chip gullet design. It was developed for easily cut materials like cast iron and low alloyed steel.
A Double Flute DR-DH-31.65-0350NC-2FD has a double chip gullet for upgraded chip flow. It was built for drilling gummy materials such as non-alloyed steel and high temperature alloys.
ISCAR DEEP HOLE DRILLS
With ISCAR's innovative solid carbide deep hole drills, you can safely drill up to 22 times diameter and reach bottom10% faster than with other solid carbide drills - and six times faster than a HSS drill. This capability can speed up several high-volume operations. The deep-hole drilling station no longer has to slow down a transfer line or stop it completely because a drill broke.
Other target applications include deep holes for automotive, hydraulic blocks and die & mold work. A mixture of features help the twist drills to cut faster, straighter,deeper, last longer and expel chips more surely. A unique high-strength core creates a more long lasting drill point and allows for deeper flutes, enlarging the exit path for chips.
The drill tip themselves has a 140 positive-point, four-margin design to preserve the edge, diminish thrust forces and aid centering and tracking. A post-coat polishing step on the flutes, margins and cutting edges reduces friction and torque that can readily snap a drill.
The latest drills are available in normal diameters ranging from 5 to 10 mm, in 20 and 22 length to diameter ratios. Special sizes are obtainable on request. All are made of IC908, a 10% cobalt submicron carbide grade, and comes with a TiAlN PVD coating, and can be refurbished.
These are just some of the latest innovations coming from Iscar.
Iscar Recently Made Public Numerous Brand New Lines To Extend Their Family Of Milling Cutters
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.
Iscar Announces A Brand New Family Of Slitting Cutters Applying Tang-Grip Technology And The Strength Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.
Cutting Edge Cutters And Carbide Insert Compositions From Iscar To Better Improve The Machining Method
Iscar is introducing Penta 34 carbide inserts with a new PB chipformer. The PB chipformer features a single cavity with a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer with a different frontal edge.
Several Developments Have Multiplied Iscar's Line Of Indexable Endmills For Increased Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.
Push Pull Testing For Railway Industry With Calibrated Gauges. Stress Load Testing Procedures For On Site Proof To Testing Requirements.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.
Industrial Water Heater - Considering All Of Your Requirements - Study Carefully To Know More
Looking into a commercial water heater? Then you have a few things that you must consider. Take a look at these areas to avoid making a mistake with the wrong unit.
Innovative Car Manufacturing Jobs To Conserve The Economic System
The global recession the economy is experiencing in the past few years have pushed major companies to close down and stop their operations.
|
More Articles
Blogroll
|
